MAKROFOL PC VE 000000 Characterization Makrofol PC VE 000000 is an extrusion film based on Makrolon polycarbonate. Properties Applications Makrofol PC VE 000000 typical applications are automotive labels control panels membrane switches nameplates light diffusion packaging and automotive interior decoration. Makrofol PC VE 000000 is available in various standard thicknesses from 0.005 to 0.030 125 microns to 750 microns. Other thicknesses are available on request. The surface combination of Makrofol PC VE 000000 is one side velvet and one side gloss. As with any product use of Makrofol PC VE 000000 in a given application must be tested including but not limited to field testing in advance by the user to determine suitability page 1 of 3 Document contains important information and must be read in its entirety. Edition 2012-05-11 Product Datasheet MAKROFOL PC VE 000000 Typical Properties Property General Specific Gravity Conversion Factor Test Method Unit ASTM D 792 Gloss 60 top side black inked second surface Roughness R3z top side Roughness R3z reverse side Surface Mechanical Tensile Strength Yield Tensile Strength Break Elongation at Break Flexural Modulus Tear Strength Initiation Thermal Coefficient of linear thermal expansion parallel 20C to 120C Coefficient of linear thermal expansion across 20C to 120C Shrinkage parallel 130C 1h Shrinkage across 130C 1h Heat Deflection Temperature 1.82 MPa 0.45 MPa Vicat Softening Temperature Rate A Flammability Burning Rate FMVSS 302 UL Listing UL Listing Optical Light Transmittance ASTM D 2457 1.20 ft lbmil m kgmm 161 0.833 gloss unit 6 to 10 ISO 428788 ISO 428788 m m 11 to 23 0.5 velvetgloss ASTM D 882 ASTM D 882 ASTM D 882 ASTM D 790 ASTM D 1004 psi psi psi lbin 9100 10500 125 330000 1100 DIN 53752 10 K -6 70 DIN 53752 10 K -6 70 IEC 60674-2 IEC 60674-2 ASTM D 648 F 0.4 0.4 ASTM D 1525 F 297 ISO 3795 UL 94 V-2 UL 94 VTM-2 mmmin min. thickness min. thickness 100 0.015 375 m 0.005 125 m ASTM D 1003 Yellowness
Index ASTM E 313 Other Water Absorption saturation ISO 62 Water Absorption immersion at 73F24h ASTM D 570 70 20 mil 80 20 mil 1 0.20 0.33 2 Value 2 270 288 These items are provided as general information only. They are approximate values and are not part of the product specifications. page 2 of 3 Document contains important information and must be read in its entirety. Edition 2012-05-11 Product Datasheet MAKROFOL PC VE 000000 Health and Safety Information Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling this product. Before working with this product you must read and become familiar with the available information on its risks proper use and handling. This cannot be overemphasized. Information is available in several forms e.g. safety data sheets and product labels. For further information contact your Covestro LLC representative or the Product Safety and Regulatory Affairs Department in Pittsburgh PA. The manner in which you use and the purpose to which you put and utilize our products technical assistance and information whether verbal written or by way of production evaluations including any suggested formulations and recommendations are beyond our control. Therefore it is imperative that you test our products technical assistance and information to determine to your own satisfaction whether our products technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health safety and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to c
hange without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability in tort contract or otherwise incurred in connection with the use of our products technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent. Editor Covestro LLC 1 Covestro Circle Pittsburgh Pennsylvania 15205 United States www.covestro.com Contact 8 Fairview Way South Deerfield MA 01373 Tel. 413-665-7016 page 3 of 3 Document contains important information and must be read in its entirety. Edition 2012-05-11 Product Datasheet
