Makrofol DE 1-1 000000 Description and Application Information Makrofol DE 1-1 000000 is an extrusion film based on Makrolon the High Tech Polycarbonate made by Covestro. It comprises excellent transparence combined with high optical quality. The surface structure of Makrofol DE 1-1 000000 is both sides gloss both sides are masked with a protective masking as a standard. It is available in various standard thicknesses from 125 microns to 1000 microns other thicknesses on request. Typical applications are name plates and panels. Guide data General properties Property Density Value 12 Unit of measurement gcm Method ISO 1183 20C method C Gloss 60 top side 99 Digits ISO 2813 Gloss 60 reverse side 99 Digits ISO 2813 Roughness R3z top side 05 m following ISO 428788 Roughness R3z reverse side 05 m following ISO 428788 Property Tensile Modulus Value 2200 Unit of measurement MPa Method ISO 527-1-3 Stress at break parallel 70 MPa ISO 527-1-3 Stress at break across 70 MPa ISO 527-1-3 Strain at break parallel 150 ISO 527-1-3 Property Coefficient of linear thermal expansion parallel 20 to 120C Value 70 Unit of measurement 10 K -6 Method following DIN 53752 Coefficient of linear thermal expansion across 20 to 120C 70 10 K -6 following DIN 53752 Shrinkage parallel 130C 1 h 03 following IEC 60674-2 Shrinkage across 130C 1 h 03 following IEC 60674-2 Value 100 Unit of measurement mmmin Method ISO 3795 Mechanical properties Thermal properties Burning behavior Property Burning rate FMVSS 302 page 1 of 2 Edition 2022-09-21 Replaces edition dated 2022-08-01 Product Datasheet Makrofol DE 1-1 000000 Optical properties Property Light transmittance Value 80 Unit of measurement Method ISO 13468-2 following DIN 5036 Value 02 Unit of measurement Method following ISO 62 Other properties Property Water absorption saturation These values provide general information and are not part of the product specification. Labeling and REACH applications This product data sheet is only v
alid in conjunction with the latest edition of the corresponding Safety Data Sheet. Any updating of safety-relevant information in accordance with statutory requirements will only be reflected in the Safety Data Sheet copies of which will be revised and distributed. Information relating to the current classification and labeling applications and processing methods and further data relevant to safety can be found in the currently valid Safety Data Sheet. The manner in which you use and the purpose to which you put and utilize our products technical assistance and information whether verbal written or by way of production evaluations including any suggested formulations and recommendations are beyond our control. Therefore it is imperative that you test our products technical assistance information and recommendations to determine to your own satisfaction whether our products technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health safety and environmental standpoint. Such testing has not necessarily been done by Covestro. Unless we otherwise agree in writing all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability in tort contract or otherwise incurred in connection with the use of our products technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the cla
ims of any patent. Editor Specialty Films Covestro AG Kaiser-Wilhelm-Allee 60 D-51373 Leverkusen www.makrofol.com page 2 of 2 Edition 2022-09-21 Replaces edition dated 2022-08-01 Product Datasheet
