TECAFORM AH ID blue

TECAFORM AH ID blue - Stock Shapes rods plates tubes Chemical Designation POM-C Polyacetal Copolymer Main features metal detectable easy to machine excellent mechanical properties good wear properties low moisture absorption good dimensional stability Colour blue Density 1.48 gcm3 Target Industries food processing conveyor technology engineering for beverage filling systems pharmaceutical industry packaging and paper machinery Fillers detectable filler Mechanical properties condition value Modulus of elasticity tensile test 73 F 450000 psi ASTM D 638 Tensile strength at yield 73 F 9500 psi ASTM D 638 Elongation at break tensile test 73 F 10 ASTM D 638 Flexural strength 73 F 15000 psi ASTM D 790 Modulus of elasticity flexural test 73 F 450000 psi ASTM D 790 Compression strength 73 F 1 strain 3100 psi ASTM D 695 Compression strength 73 F 10 strain 14000 psi ASTM D 695 300000 psi ASTM D 695 ft-lbsin ASTM D 256 Compression modulus Impact strength Izod 73 F 0.77 Rockwell hardness M Scale 91 Thermal properties condition value Melting temperature test method comment ASTM D 785 test method 329 F ASTM D 2133 comment Service temperature Intermittent 285 F - 1 Service temperature Long Term 212 F - 2 7.710 -5 ininF ASTM D 696 3 Thermal expansion CLTE Electrical properties condition value 1.010 12 surface resistivity test method square 1 publicly sourced data 2 publicly sourced data 3 Injection Molded sample comment - Other properties condition value Moisture absorption 24 hrs 73 F 0.22 test method ASTM D 570 Moisture absorption saturation 73 F 0.65 ASTM D 570 comment Resin specification ASTM D6778-06 POM0211 superseding ASTM D4181-00 POM211 Shapes specification ASTM D6100-11 S-POM211 This information reflects the current state of our knowledge and is intended only to assist and advise. It is given without obligation or liability. It does not assure or guarantee chemical resistance quality of products or their suitability in any legally binding way. Values are not m

inimum or maximum values but guidelines that can be used for comparative purposes in material selection. They are within the normal range of product properties and do not represent guaranteed property values. Testing under individual application circumstances is always recommended. Data is obtained from extruded shapes material unless otherwise noted. References to FDA compliance refer to the resins from which the products were made unless otherwise noted. All trade and patent rights should be observed. All rights reserved. Data sheet values are subject to periodic review the most recent update can be found at www.ensingerplastics.com. Ensinger Inc. Headquarters 365 Meadowlands Boulevard Washington PA 15301 USA Phone 800-243-3221 Sales Phone 800-869-4029 Technical Fax 724-746-9209 salesensingerusa.com Date 20170810 Version A0