Skip to content

JBF Aryapet A460

IntePro Standard Products and Tolerance Standard Thickness and Weight of Polypropylene PP IntePro Thickness Unit Weight in gm2 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm 10 mm 13 mm 16 mm 19 mm 25 mm 490 600 750 1000 1400 1700 1800 2000 2690 3300 4000 4800 Unit Weight in lbsmsf 100 123 154 205 287 348 369 410 550 Note PP IntePro of special weight and thickness may be available upon request. 680 820 Tolerance of IntePro a Width Mill-Run IntePro 18 Square-Cut IntePro 116 b Length variation is listed in the following table. IntePro Length Mill-Run IntePro Square-Cut IntePro 0 to 48 0 to 34 -116 to 18 48 to 96 0 to 1 12 -18 to 14 96 0 to 1 12 14 x N 14 Note N Length of IntePro in inches 96 24 c Thickness 5 d Unit Weight 5 e Surface Treatment ASTM D2578 46 dynecm 2 to 8 mm in thickness 42 dynecm 10 to 13 mm in thickness 40 dyne cm 16 to 25 mm in thickness f Square Tolerance is the difference of the two diagonals of Intepro board. IntePro Length Mill-Run IntePro Square-Cut IntePro 0 to 48 38 116 48 to 96 34 18 96 34 14 x N 14 Note N Length of IntePro in inches 96 24 Revised 080613 984 g Straightness IntePro may slightly curve in along flute direction. The straightness is related to the ratio of length and width of IntePro board. The more slender the board is the more obvious the curve is. The straightness can be obtained from measuring the maximum gap between a straight edge and an IntePro board when the two corners of IntePro board touch the straight edge. The tolerance of straightness of mill-run IntePro is listed in the following two tables. Length of IntePro is 96 Ratio of Length to Width 0 to 3 Straightness Tolerance 18 3 316 Length of IntePro is 96 Ratio of Length to Width 0 to 3 3 to 4 4 Straightness Tolerance 316116x N 316116x N 14116x N Note N Length of IntePro in inches 96 24 h Warp is the height of the hump when an IntePro board is laid on a flat surface. The warp tolerance can be found out from the following table. Length of Inte

Pro is 96 Width of IntePro Warp Tolerance 0 to 24 14 24 to 48 12 48 to 60 1 60 1 14 48 to 60 1 1414xN 60 1 12 14xN Length of IntePro is 96 Width of IntePro 0 to 24 24 to 48 Warp Tolerance 3818xN 3414xN Note N Length of IntePro in inches 96 24 i Shipment on Piece Count - 0 5 of order piece quantity Note The information is based on our current knowledge and is subjected to change without notice. Revised 080613