Product Bulletin Concept 106 TRANSPARENCY MOUNTING FILM Concept Transparency Mounting Film is a double-coated pressure sensitive 1.0 mil polyester film with the optically clear 204-4100 permanent acrylic adhesive. Two 1.5 mil polyester film liners are used to maintain excellent adhesive clarity. This clear mounting film offers protection from UV abrasion moisture and other environmental exposures. This product is designed for laminating thin flexible films and papers under 10 mils in total thickness. It can be laminated by the cold laminating process without the addition of heat. Applications Transparency Mounting Film is designed to mount backlit transparencies to glass Plexiglas or other clear substrates in light box applications. The product also provides distortion-free face mounting of prints to these same clear substrates. Thickness Film 1.0 mils. Adhesive 1.3 to 1.7 mils each side. Liner 1.5 mils. Thickness variance - 10 Dimensional Stability Good. Expected Exterior Exposure Up to 1 year under normal exposure conditions Temperature Ranges Minimum application temperature Service temperature range 40 F. -40F to 200F. Adhesion To stainless steel 48 ozin. When tested according to PSTC-1 01 Method A with 24 hr. dwell at 70F and 50 relative humidity. Typical values. Individual values may vary. Test thoroughly before production. Light Transmission Approximately 84 550nms. Storage Stability 1-year shelf life when stored at 70F and 50 relative humidity. Product Series Concept 106 Manufacturer of Pressure Sensitive Films Traffic Graffic Floor Advertising Films Custom Coatings and Printing Inks. 309 S. Union P.O. Box 158 Sparta Michigan 49345 616 887-7387 800253-3664 FAX 616887-0537 Web Site www.generalformulations.com e-mail gfiinfogeneralformulations.com We believe the information on this product to be accurate. However since we cannot anticipate or control the conditions under which this information or our products may be used we cannot guarantee results obtai
ned through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty either express or implied. The purchaser should refer to General Formulations Incs Price List for Terms and Conditions or Sale Including Disclaimer of Warranties and Limitation of Liability.
