SEAL Ultra Series Laminators by Piedmont Plastics, Inc.

" RESPONSE.WRITE "

Informational Links:

Quick Links:

Acrylic Sheet
Alucobond
Cyro Sterling Acrylic Sheet
Gatorfoam Board
IBBI - Independent Boat Builders, Inc
King Starboard
KYDEX Thermoforming Sheet
LEXAN Polycarbonate Film
LEXAN Polycarbonate Sheet
Online Services Tutorial
PETG copolyester
PFlex Pressure Sensitive Film
Piedmont Film Group
Plastic Product Links
Plexiglas
Products In Spanish
TYGON Tubing

Home \| Product Groups \|

Digital Equipment

To request a quote on this item, click here

New to finishing? Go for the easiest SEAL wide format laminator available. The SEAL 62 and 44 Ultra Series Laminators are ideal for first time users when low volume, yet high quality professional graphics are required.

There are three models to choose from:
• 44 Ultra
• 62 Ultra S
• 62 Ultra C

44 Ultra (Part # 63044):
Max. Working Width 44"
Max. Speed 5 ft/min (1.5 m/min)
Max. Nip Opening 1/2"
Electrical Requirements Single Phase 115 VAC, 50/60 Hz, 16A

62 Ultra S / 62 Ultra C:
Max. Working Width: 61" (1550 mm) 61" (1550 mm)
Max. Speed: 5 ft/min (1.5 m/min) 10 ft/min (3m/min)
Max. Nip Opening: 1/2" 1/2"
Electrical Requirements: Single Phase 230 VAC, 50/60 Hz, 13A Single Phase 115 VAC, 50/60 Hz, 1A

Ease of use
• Simple touch pad control panel
• Quick reference guide on on board for applications
• Adjustable speed dial for user control of settings
• One control knob for 8 nip settings from 0 to 1/2”
• Easy to clean silicon rollers prevent sticking of materials
• Auto-grip shafts for easy loading of materials and removal of release liners
• No special power requirements for plug and play on 44 Ultra and 62 Ultra C
• Castors for easy mobility

Optimum Performance
• Maximum nip opening of 1/2" for processing of most popular substrates
• Foot control for hands free operation and precise media/substrate feed

Safety
• Safety system with emergency stops
• CE/ETL certified
• Anti-tip bars for increased stability

Special Features
44 and 62 Ultra S
• 3 temperature settings 125°F/50°C, 195°F/90°C, 250°F/120°C for use with different films and adhesives

62 Ultra C
• Maximum speed up to 10ft/minute

Related Links:
http://www.sealbrands.com

	You are currently in:

	Select Product:

<% SUB DISPLAY_BRANCHES() ON ERROR RESUME NEXT DIM STRSQL DIM I, SCODE I = 1 STRSQL = "select name, scode from tblbr where not code in ('COM','FAB') and ispiedmont = 1" STRSQL = STRSQL & " order by scode, name " CALL CREATE_RS(STRSQL,-1) WHILE NOT RS.EOF SCODE = RS("scode") RESPONSE.WRITE RS("name") & ", " I = I + 1 RS.MOVENEXT IF NOT RS.EOF THEN IF SCODE <> RS("scode") THEN RESPONSE.WRITE SCODE IF NOT I < 10 THEN RESPONSE.WRITE "

" I = 0 ELSE RESPONSE.WRITE " | " END IF END IF ELSE RESPONSE.WRITE SCODE END IF WEND IF ERR.NUMBER <> 0 THEN ERR_HAND END IF END SUB %>

IAPD: International Association of Plastics Distributors

Visit our sister site:Regal Piedmont Plastics, Inc. and thePiedmont Plastics ebay Store
For Spanish Visit www.regalplastics.com.mx
Learn more about our Film Group, www.piedmontfilmgroup.com

Piedmont Plastics is Registered in the US Patent and Trademark Office

<% DISPLAY_BRANCHES %>

<%DESTROY_EVERYTHING%>