SEAL® 80 Pro Laminator by Piedmont Plastics, Inc.

" RESPONSE.WRITE "

Informational Links:

Quick Links:

Acrylic Sheet
Alucobond
Cyro Sterling Acrylic Sheet
Gatorfoam Board
IBBI - Independent Boat Builders, Inc
King Starboard
KYDEX Thermoforming Sheet
LEXAN Polycarbonate Film
LEXAN Polycarbonate Sheet
Online Services Tutorial
PETG copolyester
PFlex Pressure Sensitive Film
Piedmont Film Group
Plastic Product Links
Plexiglas
Products In Spanish
TYGON Tubing

Home \| Product Groups \|

Digital Equipment

To request a quote on this item, click here

Looking to produce extra wide signs and displays with ease? Look no further than the new SEAL 80 Pro!

This dual-heated, 80" wide mounter, laminator and encapsulator has been designed to simplify the handling of over-sized prints for single person operation.

An extended version of the successful SEAL 62 Pro, this incredible laminator has all of the performance-led features you would expect from SEAL plus the following unique features:

• Innovative feed table with integrated tensioning rollers, roll/image trough and flip down image guide
for optimum media handling and feeding.
• Flip-up pull rollers for flatter, smooth encapsulation and easy access when not encapsulating
• Combi-supply shafts for maximum flexibility
• Ergonomic touch pad control panel on a pivot arm for front or rear operation
• Output slitters to trim image to size during operation
• Automatic upper take-up shaft for removing release liners
• Trip cord for operator safety

Maximum working width: 80" (2000 mm)
Maximum heated width: 80" (2000 mm)
Maximum substrate thickness: 1 1/2" (38mm)
Maximum speed: 20 ft./min. (6m/min)
Electrical requirements: 1N/PE-230 VAC +/- 10%, 50/60Hz 40A,

Related Links:
http://www.sealbrands.com

	You are currently in:

	Select Product:

<% SUB DISPLAY_BRANCHES() ON ERROR RESUME NEXT DIM STRSQL DIM I, SCODE I = 1 STRSQL = "select name, scode from tblbr where not code in ('COM','FAB') and ispiedmont = 1" STRSQL = STRSQL & " order by scode, name " CALL CREATE_RS(STRSQL,-1) WHILE NOT RS.EOF SCODE = RS("scode") RESPONSE.WRITE RS("name") & ", " I = I + 1 RS.MOVENEXT IF NOT RS.EOF THEN IF SCODE <> RS("scode") THEN RESPONSE.WRITE SCODE IF NOT I < 10 THEN RESPONSE.WRITE "

" I = 0 ELSE RESPONSE.WRITE " | " END IF END IF ELSE RESPONSE.WRITE SCODE END IF WEND IF ERR.NUMBER <> 0 THEN ERR_HAND END IF END SUB %>

IAPD: International Association of Plastics Distributors

Visit our sister site:Regal Piedmont Plastics, Inc. and thePiedmont Plastics ebay Store
For Spanish Visit www.regalplastics.com.mx
Learn more about our Film Group, www.piedmontfilmgroup.com

Piedmont Plastics is Registered in the US Patent and Trademark Office

<% DISPLAY_BRANCHES %>

<%DESTROY_EVERYTHING%>